The Primo TDS tester (Total Dissolved Solids Tester) with Automatic
Temperature Compensation.
The Primo TDS tester provides a fast and dependable way to
measure the Total Dissolved Solids in your water samples. It is ideally
suited for the rigorous demands of water quality professionals, who will
appreciate the practicality of Primo's easy-to-read LCD when
demonstrating the before and after results of conditioning and
filtration systems. Temperature is compensated automatically to ensure
the readings are consistent to the standard or reference temperature.
Operating and routine maintenance has never been easier. Primo
TDS uses a single button at the top of the meter. Press it once and the
meter is powered and ready for use. Press and hold the button for a few
seconds and Primo automatically enters calibration mode. Simply open a
sachet of the calibration solution, dip the probe and within seconds the
meter recognizes the calibration solution and calibrates itself!
Maximum battery life is managed by Primo's power microprocessor, which
automatically turns it of after 5 minutes of inactivity.
Order Information:
Primo is supplied with batteries, instructions and calibration
solution.
Specification: |
|
| Range |
0 to 1999 ppm (mg/L) |
| Resolution |
1 ppm (mg/L) |
| Accuracy |
±2% F.S. |
| Calibration Solution |
HI 70032P |
| Calibration |
Automatic, at 1382 ppm |
| Temperature Compensation |
Automatic, 0 to 60°C (32 to 140°F),
ß=2%/°C |
| Battery Type / Life |
2 x 1.5V / approx. 200 hours; auto-off
after 5 minutes of non-use |
| Environment |
0 to 50°C (32 to 122°F); RH max 95% |
| Dimensions |
180 x 50 x 25 mm (7.1 x 2.0 x 1.0") |
| Weight |
50 g (1.8 oz.) |
Included Reagents: HI 70032 1382 ppm
(mg/L) Calibration Solution Primo Manual Download: Here |
